What is rapid prototyping and how can it apply to the ELT classroom?

Nicole Kyriacou
A teacher stood in front of her class with her students raising their hands
Reading time: 5 minutes

Tom Chi is an internet veteran with quite a resumé. His roles have been many and varied – from astrophysical researcher to Fortune 500 consultant and corporate executive, developing new hardware and software products and services.

He worked on Microsoft Outlook when it was in its infancy, was a major influence in taking Yahoo Search from 0 to 90 million users and is now Head of Product Experience at Google X – Alphabet’s secretive division focused on creating technological innovations for the future. It has produced the self-driving car and Google Glass, and its Project Loon aims to provide internet to every square inch of the earth.

At Google X, Tom was in a unique position – always having to think five, ten or even more years ahead in order to conceptualize and build the technology of the future. As you might imagine, this is far from an easy task; not only do the ideas have to be original, but they have to meet people’s future needs – something that is not easy to predict.

So, how does Tom and the others at Google X deliver their vision for the future using today's materials and technology?

That’s where Rapid Prototyping comes in. It’s a concept that allows teams to experiment, learn and adjust prototypes quickly and cheaply, so that projects (and products) get off the ground. Failure is seen as a starting block and an inevitable part of the learning process. Following his workshop, we are going to look further at rapid prototyping and how it can relate to the ELT classroom.

Integrating rapid prototyping into ELT teaching
Play
Privacy and cookies

By watching, you agree ÃÛÌÒapp can share your viewership data for marketing and analytics for one year, revocable by deleting your cookies.

What are the rules of rapid prototyping?

According to Tom, rapid prototyping follows four main principles:

Rule #1:

You must find the quickest path to experience. Ideas are nothing until they have been tested; prototyping is the quickest path to go from guessing into direct experience. You will soon see an idea’s strengths, weaknesses and potential once you have tried it.

Rule #2:

Doing is the best kind of thinking. People are very good at imagining things, but until we try them, we won’t know what works and what doesn’t. By actually doing something, we’ll come up with new ideas, new challenges and new solutions.

Rule #3:

Prototyping follows a distinct pathway: from conjecture, to experimentation, to results and finally decision-making. Ìý

Prototyping rule #4:

Prototyping helps us reason in time and space: instead of lots of planning, imagination and guesswork, it makes us build something real, considering real use cases and real situations.

How does rapid prototyping affect progress?

The rapid-prototyping learning loop follows this pattern:

  1. Building a variation
  2. Testing with customers
  3. Observing results
  4. Adjusting from results

This process allows us to increase the chances of success in any given project dramatically. For example, if an idea has a 5% chance of success, by trying it 20 times there is a 64% chance of success and by trying it 50 times, there is a 92% chance of success.

Considering that each time an idea is prototyped, learning takes place, the chances of success are likely even higher with every trial.

But wait, what has rapid prototyping got to do with the ELT classroom?

Tom shows how a technology giant like Google can innovate and produce results quickly and efficiently through rapid prototyping – and all the while, he is explaining how much faster learning is when we experiment and do things.

Encouraging project-based work

Of course, our students are not innovating or building new products for tech companies, they are aiming to learn a language. But as Tom said, learning by doing is much faster and more effective than simply conjecturing and talking about theories.

Following his first rule of prototyping (find the quickest path to experience), we need to give students the experience of using the language as fast as possible. Project and task-based learning allows students to build their vocabulary, and test their grammar and overall communications skills in an authentic way.

This also covers Tom’s second rule (doing is the best type of thinking). If we can tap into our students’ creativity, we can allow them to experiment with language, discover what they know and what they don’t know, and then really work on learning the things they need for certain tasks.

When it comes to Tom’s third rule (conjecture, experimentation, results, decision-making), the teacher has more responsibility. We need to look at how we benchmark, measure and analyze our learner’s progress. Without a pathway, our students will not know how they are progressing and may easily lose motivation. The students therefore need to have a firm idea of their abilities, when they need to learn and how they are currently performing. We can then make decisions regarding individual class plans and syllabi.

Finally, by exposing our students to authentic materials, we cover Tom’s fourth rule (reason in time and space). Authentic readings, listenings and videos give learners the opportunity to work with real-world language, trying out what they are learning in authentic contexts. It helps them imagine using the language outside of the safe environment of the classroom too, giving them the challenge they need to push them into learning faster.

Fostering a growth mindset

The very fact that Tom’s team is able to imagine and prototype what seem like impossible ideas – that then have the potential to change the world – is awe-inspiring.

We can all learn from his vision, tenacity and methodology. At the heart of the experimentation and learning at Google X lies a growth mindset.

If we help our students develop a growth mindset, they will see failure as an opportunity to learn, as well as a challenge as a chance to grow, and feedback as a constructive way to improve.

Learning is a dynamic process. As teachers, it’s important for us to look outside the world of education to find inspiration and ideas. We hope this has sparked your curiosity and added a dash of inspiration for your future classes.

More blogs from ÃÛÌÒapp

  • Children in a classroom with their hands up

    8 first lesson problems for young learners

    By Joanna Wiseman

    The first class with a new group of young learners can be a nerve-wracking experience for teachers old and new. Many of us spend the night before thinking about how to make a positive start to the year, with a mixture of nerves, excitement, and a desire to get started. However, sometimes things don’t always go as expected, and it is important to set a few ground rules in those early lessons to ensure a positive classroom experience for all, throughout the academic year.

    Let’s look at a few common problems that can come up, and how best to deal with them at the start of the school year.

    1. Students are not ready to start the class

    How the first few minutes of the class are spent can greatly influence how the lesson goes. Students can be slow to get out their equipment and this can cause a lot of time wasting. To discourage this, start lessons with a timed challenge.

    1. Tell students what you want them to do when they come into class, e.g. sit down, take out their books and pencil cases, sit quietly ready for the lesson to start.
    2. Time how long it takes for everyone to do this and make a note. Each day do the same.
    3. Challenge students to do this faster every day. You could provide a goal and offer a prize at the end of the trimester if they reach it, e.g. be ready in less than a minute every day.

    2. Students speak their first language (L1) in class

    One of primary teachers' most common classroom management issues is getting them to speak English. However, young learners may need to speak their mother tongue occasionally, and a complete ban on L1 is often not the best solution. But how can we encourage students to use English wherever possible?

    Tell students they have to ask permission to speak in L1, if they really need to.

    • 3 word rule — tell students that they can use a maximum of three words in L1 if they don’t know them in English.
    • Write ENGLISH on the board in large letters. Each time someone speaks in L1, erase a letter. Tell students each letter represents time (e.g. 1 minute) to play a game or do another fun activity at the end of the lesson. If the whole word remains they can choose a game.

    3. Students don’t get on with each other

    It is only natural that students will want to sit with their friends, but it is important that students learn to work with different people. Most students will react reasonably if asked to work with someone new, but occasionally conflicts can arise. To help avoid uncomfortable situations, do team building activities, such as those below, at the beginning of the school year, and do them again whenever you feel that they would be beneficial:

    • Give students an icebreaker activity such as 'find a friend bingo' to help students find out more about each other.
    • Help students learn more about each other by finding out what they have in common.
    • Balloon race. Have two or more teams with an equal number of students stand in lines. Give each team a balloon to pass to the next student without using their hands. The first team to pass the balloon to the end of the line wins.
    • Team letter/word building. Call out a letter of the alphabet and have pairs of students form it with their bodies, lying on the floor. When students can do this easily, call out short words, e.g. cat, and have the pairs join up (e.g. three pairs = group of six) and form the letters to make the word.

    4. Students don’t know what to do

    When the instructions are given in English, there will inevitably be a few students who don’t understand what they have to do. It is essential to give clear, concise instructions and to model the activity before you ask students to start. To check students know what to do and clarify any problems:

    • Have one or more students demonstrate using an example.
    • Have one student explain the task in L1.
    • Monitor the task closely in the first few minutes and check individual students are on the right track.

    5. A student refuses to participate/do the task

    This is a frequent problem that can have many different causes. In the first few lessons, this may simply be shyness, but it is important to identify the cause early to devise an effective strategy. A few other causes might include:

    • Lack of language required to respond or do the task. Provide differentiation tasks or scaffolding to help students with a lower level complete the task or have them respond in a non-oral way.
    • Low self-confidence in their ability to speak English. Again, differentiation and scaffolding can help here. Have students work in small groups or pairs first, before being asked to speak in front of the whole class.
    • Lack of interest or engagement in the topic. If students aren’t interested, they won’t have anything to say. Adapt the topic or task, or just move on.
    • External issues e.g. a bad day, a fight with a friend, physical problems (tiredness/hunger/thirst). Talk to the student privately to find out if they are experiencing any problems. Allow them to 'pass' on a task if necessary, and give them something less challenging to do.

    It is important not to force students to do something they don’t want to do, as this will cause a negative atmosphere and can affect the whole class. Ultimately, if a student skips one or two tasks, it won’t affect their achievement in the long run.

    6. Students ask for repeated restroom/water breaks

    It only takes one student to ask to go to the restroom before the whole class suddenly needs to go! This can cause disruption and stops the flow of the lesson. To avoid this, make sure you have rules in place concerning restroom breaks:

    • Make sure students know to go to the restroom before the lesson.
    • Have students bring in their own water bottles. You can provide a space for them to keep their bottles (label them with student names) in the classroom and have students fill them daily at the drinking fountain or faucet.
    • Find out if anyone has any special requirements that may require going to the restroom.
    • Provide 'brain breaks' at strategic points in the lesson when you see students becoming restless.

    7. Students don’t have the required materials

    • Provide parents with a list of materials students will need on the first day.
    • If special materials are required in a lesson, give students a note to take home or post a message on the school platform several days before.
    • Don’t blame the student - whether they have a good reason or not for turning up to class empty-handed, making a child feel guilty will not help.
    • Write a note for parents explaining why bringing materials to class is important.

    8. Students are not listening/talking

    Getting their attention can be challenging if you have a boisterous class. Set up a signal you will use when you want them to pay attention to you. When they hear or see the signal, students should stop what they are doing and look at you. Some common signals are:

    • Raising your handÌý- When students see you raise your hand, they should raise their hands and stop talking. Wait until everyone is sitting in silence with their hands raised. This works well with older children and teenagers.
    • Call and response attention-getters - These are short phrases that prompt students to respond in a certain way, for example: Teacher: "1 2 3, eyes on me!"ÌýStudents: "1 2 3, eyes on you!". Introduce a new attention-getter every few weeks to keep it fun. You can even have your students think up their own phrases to use.
    • Countdowns -ÌýTell students what you want them to do and count backwards from ten to zero, e.g. "When I get to zero, I need you all to be quiet and look at me. 10, 9, 8 …"
    • Keep your voice low and speak calmly -ÌýThis will encourage students to stop talking and bring down excitement levels.
    • A short song or clapping rhythm -ÌýWith younger children, it is effective to use music or songs for transitions between lesson stages so they know what to do at each stage. For primary-aged children, clap out a rhythm and have them repeat it. Start with a simple rhythm, then gradually make it longer, faster, or more complex.